Experimental and Numerical Investigation of the Loss Coefficient of a 90° Pipe Bend for Power-Law Fluid

Authors

  • Máté Bíbok
    Affiliation
    Department of Hydrodynamic Systems, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, H-1521, Budapest, P. O. B. 91, Hungary
  • Péter Csizmadia
    Affiliation
    Department of Hydrodynamic Systems, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, H-1521, Budapest, P. O. B. 91, Hungary
  • Sára Till
    Affiliation
    Department of Hydrodynamic Systems, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, H-1521, Budapest, P. O. B. 91, Hungary
https://doi.org/10.3311/PPch.14346

Abstract

This study presents an investigation on the flow of two non-Newtonian fluids. These materials can be found in industrial environment, such as pharmaceutical and food industries, and also in wastewater treatment. In industrial environment, these fluids are usually driven by pumps between two workstations in the system, which represents a significant proportion of the costs. In order to operate the system cost-efficiency and environment friendly accurate sizing is necessary, which requires data on the hydraulic resistance of the elements. In the case of Newtonian fluids, these parameters are well-known. However, the non-Newtonian fluids have a considerably narrower literature, so laboratory and numerical tests are desirable. In our work, the hydraulic losses of two real non-Newtonian fluids were studied which can be described with the power law rheological model. These studies included laboratory measurements and numerical simulations (Computational Fluid Dynamics, CFD), respectively. We investigated the friction factor of a straight pipe and loss coefficient of an elbow (R/D=2). The calculations were validated with our laboratory measurements and compared with the literature. Furthermore, the flow pattern in the pipe bend was also examined. The study presents the applicability and importance of the modification of the Reynolds number. Furthermore, the velocity profiles and the secondary flow structure in the elbow are also presented.

Keywords:

CFD simulation, measurement, hydraulic losses, non-Newtonian fluid, validation

Citation data from Crossref and Scopus

Published Online

2020-04-02

How to Cite

Bíbok, M., Csizmadia, P., Till, S. “Experimental and Numerical Investigation of the Loss Coefficient of a 90° Pipe Bend for Power-Law Fluid”, Periodica Polytechnica Chemical Engineering, 64(4), pp. 469–478, 2020. https://doi.org/10.3311/PPch.14346

Issue

Section

Articles