Microwave-Assisted Transesterification of Waste Cooking Oil Using Modified CaO Catalyst for High-Purity Biodiesel Production
Abstract
Biodiesel is a renewable alternative fuel capable of partially or fully replacing conventional diesel in compression ignition engines. Waste cooking oil (WCO) represents a sustainable feedstock for biodiesel production; however, its high free fatty acid (FFA) content must be reduced below 1% to prevent emulsion formation during methanolysis. In this study, WCO was pretreated and converted into biodiesel via a two-stage process (esterification followed by transesterification) using a microwave-assisted heating system and ammonium carbonate-modified CaO catalyst. The effects of reaction time (2–10 min) and catalyst loading (1–5 wt%) on biodiesel yield and quality were investigated. Under optimal conditions, a biodiesel yield of 82.80% was achieved at 4 wt% catalyst and 6 min reaction time. The resulting biodiesel exhibited a density of 0.8617 g/mL, kinematic viscosity of 2.863 mm2/s, and a calorific value of 36.78 kJ/g (8.81 kcal/g), all complying with SNI 7182:2015 standard. Gas chromatography-mass spectroscopy analysis confirmed the formation of high-purity fatty acid methyl esters, with a total methyl ester content of 97.71%, dominated by oleic, palmitic, linoleic, stearic, and ricinoleic methyl esters. These findings indicate that microwave-assisted transesterification with modified CaO catalyst is an efficient, rapid, and sustainable method for producing high-quality biodiesel from WCO, suitable for application as a renewable diesel alternative.
Keywords:
waste cooking oil, biodiesel, microwave-assisted transesterification, modified CaO catalyst, fatty acid methyl estersPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.



