Effect of Fiber Angel of Unidirectional Longitude Fiber on Transverse Strength of Pultruded Polyester Rod

Authors

  • Babak Jouyande
    Affiliation
    Polymer engineering department, Shiraz branch, Islamic Azad University, Shiraz, Fars, Iran
  • Mohammad Rahim Vaseghi
    Affiliation
    Polymer engineering department, Shiraz branch, Islamic Azad University, Shiraz, Fars, Iran
  • Amir Hossein Haghighi
    Affiliation
    Polymer engineering department, Shiraz branch, Islamic Azad University, Shiraz, Fars, Iran
https://doi.org/10.3311/PPch.8357

Abstract

In this research by using a new technique which is named, Rotational Pultrusion, angular entrance of uni-directional (UD) fibers directly into the process was successfully reached. E-glass/polyester rods’ samples pultruded with different fiber angles and testing them with three points bending. The test showed that with an increase in UD fiber angle, toward pultruded rod direction, finally the modulus and strength on transverse direction were increased.

Keywords:

transverse strength, unidirectional longitude, pultrusion process, E-glass/polyester composite

Citation data from Crossref and Scopus

Crossref
Scopus
Google Scholar
Europe PMC

Published Online

2016-01-14

How to Cite

Jouyande, B., Vaseghi, M. R., Haghighi, A. H. “Effect of Fiber Angel of Unidirectional Longitude Fiber on Transverse Strength of Pultruded Polyester Rod”, Periodica Polytechnica Chemical Engineering, 60(2), pp. 136–140, 2016. https://doi.org/10.3311/PPch.8357

Issue

Vol. 60 No. 2 (2016)

Section

Articles