Mechanical Performance Analysis of Steel-sisal Fiber Reinforced Concrete: Based on Response Surface Methodology
Abstract
Driven by the urgent demand for sustainable infrastructure under global climate change, steel–sisal fiber reinforced concrete (SF–SiFRC) has attracted increasing research interest. However, existing studies have mainly focused on ultra-high-performance concrete and recycled aggregate concrete, while its application in ordinary concrete remains insufficiently explored. In this study, response surface methodology (RSM) was employed to systematically evaluate the effects of steel fiber (SF) contents (0.5%, 1%, and 1.5%) and sisal fiber (SiF) contents (0%, 0.2%, and 0.4%) on the mechanical properties of ordinary concrete, and to optimize their dosages and interactions. The results indicate that the incorporation of SF and SiF significantly improves mechanical performance. At the optimal combination (SF1.5SiF0.35), compressive, flexural, and tensile strengths increased by 12.7%, 53.5%, and 61.4%, respectively, compared with the control group. A carbon emission assessment was further conducted, revealing a significant reduction in carbon emissions with increasing SiF content. Notably, the SF1SiF0.4 mixture exhibited mechanical properties comparable to those of SF1.5SiF0, while reducing carbon emissions per unit volume by 15.95%. Similarly, the SF1.5SiF0.35 mixture demonstrated lower carbon emissions than SF1.5SiF0. These findings demonstrate that SF–SiFRC can enhance or maintain mechanical performance while substantially reducing carbon emissions, highlighting its potential as a sustainable construction material for low-carbon infrastructure development.
Keywords:
sisal fiber, steel fiber, response surface methodology, mechanical properties, Carbon emissionsPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

