SGS-based Reliability Assessment of Driven Piles at Solar Farm Sites
Abstract
Utility-scale solar farms require reliable design of tens of thousands of driven steel pile foundations, where wind-induced uplift governs. Spatial variability of the shallow subsurface and limited cone penetration test (CPT) coverage mean pile reliability depends on distance from the nearest test – an uncertainty Eurocode 7 does not capture. This paper proposes a probabilistic methodology combining sequential Gaussian simulation (SGS) of CPT data with three capacity methods (LCPC, AFNOR NF P 94-262 and ICP-05) and FOSM/FORM reliability analysis to quantify uplift reliability along linear Chains connecting adjacent CPT locations. The methodology is applied to a solar farm in Pleistocene sandy deposits with 70 CPTs. Two Chains are analyzed: a 309 m Chain through five CPTs in a uniform zone and a 302 m Chain through four CPTs in a variable zone. Pile reliability is governed by two independent contributions. The first is conditioning geometry: the COV of uplift resistance is smallest at CPT locations and grows with distance, forming a wave-like profile with minima of 1.4–2.7% at CPTs and maxima of 3.2–6.1% at midpoints. The second is geological variability: differences in soil strength shift the mean resistance and dominate the reliability index wherever the deposit is non-uniform. Along Chain 1, the FORM reliability index β varies only moderately, driven almost entirely by conditioning geometry. Along Chain 2, β spans a range over three times wider, reflecting dominant geological heterogeneity. The Chain-based framework provides a site-specific basis for separating these contributions, for optimizing CPT spacing and delineating geological zones.
Keywords:
driven steel piles, uplift resistance, soil spatial variability, sequential Gaussian simulation, reliability analysis, cone penetration testPublished Online
How to Cite
Issue
Section
License
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). As soon as the paper is accepted, finally submitted and edited, the paper will appear in the "OnlineFirst" page of the journal, thus from this point no other internet-based publication is necessary.

