Prospects of Using Hydrodynamic Cavitation for Enhancement of Efficiency of Fluid Working Medium Preparation Technologies

  • Anatolii Fesenko Department of Technology of Mechanical Engineering and Metal-Cutting Machine Tools, Faculty of Manufacturing Engineering, National Technical University "Kharkiv Polytechnic Institute", 61002 Kharkov, 2 Kyrpychova str., Ukraine https://orcid.org/0000-0003-0626-0180
  • Fatyma Yevsiukova Department of Technology of Mechanical Engineering and Metal-Cutting Machine Tools, Faculty of Manufacturing Engineering, National Technical University "Kharkiv Polytechnic Institute", 61002 Kharkov, 2 Kyrpychova str., Ukraine https://orcid.org/0000-0002-9764-4106
  • Yevheniia Basova Department of Technology of Mechanical Engineering and Metal-Cutting Machine Tools, Faculty of Manufacturing Engineering, National Technical University "Kharkiv Polytechnic Institute", 61002 Kharkov, 2 Kyrpychova str., Ukraine https://orcid.org/0000-0002-8549-4788
  • Maryna Ivanova Department of Technology of Mechanical Engineering and Metal-Cutting Machine Tools, Faculty of Manufacturing Engineering, National Technical University "Kharkiv Polytechnic Institute", 61002 Kharkov, 2 Kyrpychova str., Ukraine https://orcid.org/0000-0002-0848-6805
  • Vitalii Ivanov Department of Manufacturing Engineering, Machines and Tools, Faculty of Technical Systems and Energy Efficient Technologies, Sumy State University, 40007 Sumy, 2 Rymskogo-Korsakova St., Ukraine https://orcid.org/0000-0003-0595-2660

Abstract

In this article a hardware estimation procedure and optimization of parameters of working fluid cavitation processing are proposed. Here the basic aspects of preparation efficiency and using of water-fuel emulsion are reviewed. An example of estimation of energy parameters of hydrodynamic activator operation in obtaining water-fuel emulsion is supplied.

Keywords: emulsion, cavitation, hydrodynamic device, dispersant
Published online
2018-06-25
How to Cite
Fesenko, A., Yevsiukova, F., Basova, Y., Ivanova, M. and Ivanov, V. (2018) “Prospects of Using Hydrodynamic Cavitation for Enhancement of Efficiency of Fluid Working Medium Preparation Technologies”, Periodica Polytechnica Mechanical Engineering, 62(4), pp. 269-276. doi: https://doi.org/10.3311/PPme.11877.
Section
Articles