Problems of Ferrite Content Determination

Authors

  • Bálint Bögre
    Affiliation
    Department of Materials Science and Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, H-1111 Budapest, Bertalan Lajos u. 7., Hungary
  • István Mészáros
    Affiliation
    Department of Materials Science and Engineering, Faculty of Mechanical Engineering, Budapest University of Technology and Economics, H-1111 Budapest, Bertalan Lajos u. 7., Hungary
https://doi.org/10.3311/PPme.15022

Abstract

In this work five different methods – AC magnetometer, DC magnetometer, Feritscope, EBSD and X-ray diffraction - were compared with each other. These methods were used to determine the δ-ferrite content of samples. The limits, disadvantages and advantages of the applied methods were analyzed. The tested material was 2507 type super-duplex stainless steel. The samples were cold rolled and heat treated to modify their ferrite content.

Keywords:

ferrite content, alternating current magnetometer, direct current magnetometer, Feritscope, EBSD, X-ray diffraction

Citation data from Crossref and Scopus

Crossref
Scopus
Google Scholar
Europe PMC

Published Online

2020-04-29

How to Cite

Bögre, B., Mészáros, I. “Problems of Ferrite Content Determination”, Periodica Polytechnica Mechanical Engineering, 64(2), pp. 150–158, 2020. https://doi.org/10.3311/PPme.15022

Issue

Vol. 64 No. 2 (2020)

Section

Articles